Filter
Top Products
M10 Re:system
16
Ethernet interface
The Ethernet interface enables
the M10 to be integrated into a
LAN. In this way, each computer
that is also integrated in the LAN
can access the Revox system,
using the corresponding Revox
control software.
PDAs or Tablet PCs are also
suitable as control devices, which
enable a wireless connection with
feedback. For this purpose, you
need an additional Access Point or
WLAN Router for the radio
transmission, as shown in the
Figure Function Plan on Page 19.
The corresponding M230 or M231
control softwares can be found on
the Revox Homepage.
As well as operation through the
Revox service programs, the M10
also offers the option to influence
the Revox Multiroom System and/
or to let feedback messages be
directed specifically into a
visualisation, through the use of a
primary (domestic) control system.
The programmer can get a simple
access to the Revox system
through a UDP protocol (Revox M-
text protocol).
A further tool that is supported by
the M10 Ethernet interface is the
M233 Display for Display panels in
visualised domestic controllers.
The following page gives you an
initial overview of the M-Text
protocol and the M233 Display
panel.
Please visit the Download area
on the Revox Homepage for
further information.