Filter
Top Products
Page 47
Problem Solution
The handset
does not respond
when I press the
handset locator
button.
The handset is out of range of the base or the handset
battery is too low.
When I open
the Outlook
Phonebook
Utility application,
the buttons are
grayed out and I
cannot make any
selections.
See “Using the Outlook
®
Phonebook Utility” on page
32 for complete instructions. Make sure the USB cable
from the Calisto is connected to your computer.
If the USB cable is connected and the buttons are still
grayed out, you may have the wrong version of Outlook
selected. Click the Settings button. Under Outlook
Synchronization, select the version of Outlook you
are currently using.
Handset battery
life is short.
The handset is not fully charged. Place the handset
back in the charging base and charge for a minimum
of 16 hours.
The handset battery is old and will not charge well.
Replace the battery; see “Replacing the handset
battery” on page 7 for instructions.
I need to reformat
the number that
is displayed in
the Call Log—for
example, to add a
“1” in front of the
area code or to
remove the area
code completely.
In the Call Log, highlight the phone number you want to
edit/format and press the “#” key repeatedly for
different formatting options.
Options include adding a “1” in front of an area code or
simply deleting an area code. For more editing tips, see
“Viewing and editing the Call Log” on page 23.