Filter
Top Products
Connecting your equipment
03
24
En
Using the component video jacks
Component video should deliver superior picture quality
when compared to composite or S-video. A further
advantage (if your source and TV are both compatible) is
progressive-scan video, which delivers a very stable,
flicker-free picture. See the manuals that came with your
TV and source component to check whether they are
compatible with progressive-scan video.
Important
• If you connect any source component to the receiver
using a component video input, you should also have
your TV connected to this receiver's component video
MONITOR
output.
1 Connect the component video outputs of your
source to a set of component video inputs on this
receiver.
Use a three-way component video cable for the
connection.
2 Assign the component video inputs to the input
source you’ve connected.
This must be done so that they can be used in
conjunction with the audio/video input(s) to which you
have connected the component above (see
Assigning the
component video inputs
on page 82 for more on this).
3 Connect the COMPONENT VIDEO MONITOR OUT
jacks on this receiver to the component video inputs
on your TV or monitor.
• Use a three-way component video cable.
S400
S400
CENTER
SELECTABLE
Y
P
B
P
R
COMPONENT
VIDEO OUT
Y
P
B
P
R
COMPONENT
VIDEO IN
1
2
TV
VSX-AX5Ai
DVD player
VSX-AX5Ai.book 24 ページ ２００４年６月２日 水曜日 午後３時２７分