Filter
Top Products
11 Using the Timer
53
En
English
The sleep timer switches off the system after a specified time so you can fall asleep
without worrying about it.
Note: if you set the sleep timer while either the wake-up or record timer is active, the
earlier switch off time takes priority.
Press SLEEP (SHIFT+8) to select a switch-off
time.
Press repeatedly to switch between:
AUTO SLEEP – system switches off after the current source has finished
playing (you can’t set this if you’re listening to the radio, playing a DVD or
Video CD in PBC mode, or any disc in repeat play mode).
SLEEP 90 – system switches off after 90 minutes
SLEEP 60 – system switches off after an hour
SLEEP 30 – system switches off after 30 minutes
SLEEP 0 (OFF) – cancels the sleep timer
If you’ve already set the sleep timer, but want to check how much time is left, press
SLEEP. The remaining time is displayed momentarily (don’t press SLEEP again while
the time is displayed or you’ll change the sleep timer to a different setting).
Setting the Sleep Timer
The clock must be set to the correct time for the record timer to work properly.
You can set the timer to record something off the radio. For example, you might want
to record a program that is broadcast while you're at work. During the actual
recording, the volume is automatically set to minimum. After the recording has
finished, the record timer is canceled.
Note: you cannot set both the wake-up timer and the record timer simultaneously.
1 Set up the tape deck.
Load a cassette tape into TAPE I, wind on past the leader tape, and switch on/
off Dolby NR as required.
2 Press TUNER/BAND to select the tuner.
3 Tune in the station you want to record.
See page 43 for more detailed instructions on this.
4 Press TIMER/CLOCK ADJ.
5 Turn the S.M.JOG dial until the display shows
TIMER, then press SET.
Setting the Record Timer
STANDBY/ON
TIMER/CLOCK ADJ
SET
S.M.JOG
TUNER/BAND
0 EJECT