Filter
Top Products
6 More Disc Functions
35
En
English
To repeat a section of a disc:
Press RPT A-B (SHIFT+5) once at the start of the section you want to
repeat, then again at the end. Playback immediately jumps back to the start
point and plays the loop round and round.
To resume normal playback, press
CLEAR.
Note: You can't loop a section of a DVD disc where the start point falls in
one title and the end point in another.
To repeat a section of a disc once only:
Press RPT A-B (SHIFT+5) at the start of the section you want to repeat.
Press
2
6 at any time to repeat from the beginning of the section.
Programming the Track Order
DVD / Video CD / CD
This mode lets you program a sequence (a playlist) of up to 24 tracks/chapters to play
from any of the discs loaded in the disc changer. The discs can be any combination of
DVD, Video CD and audio CD, and the order any you choose. Chapters/tracks can
appear more than once in the playlist, or can be left out entirely.
The on-screen display used to program the playlist is shown below:
1 – Step number (1-6, 7-12, 13-18, 19-24)
2 – Disc number (1, 2 or 3)
3 – Title number (DVD), or track number (Video CD, CD)
4 – Chapter number (DVD only)
5 – Details of disc in current step (example shows 9 chapters in title 2 of the DVD disc
loaded in disc tray 3)
6 – Current cursor position
7 – Steps yet to be programmed
8 – Current step indicator
9 – Steps already programmed
1
2
3
4
5
6
2
1
3
3
6
5
2
2
6
--
Program
Move
Page
Exit
PROGRAM
Play
PLAY
¢4
Step
Title
Track
Disc Chap
Disc
Title
Total
3
2
9
DVD
Chapter
12 34
5
6
7
8
9