Filter
Top Products
68
MULTI-ROOM set up (VSX-27TX/26TX only)
After you have completed the necessary connections for MULTI-ROOM operation you need to set up the receiver for
such operation. Follow the instructions below. The page after this one explains how to use the MULTI-ROOM function
once it's been set up.
1 Turn on your TV and the receiver.
Make sure your TV is set to the receiver.
2 Press SYSTEM SETUP on the remote control.
The REMOTE SETUP MENU appears on your TV screen. You can
escape from this screen at any time by pressing SYSTEM SETUP
again.
3 Use the 5¥∞ buttons to select the MULTI-ROOM set
up mode and press ENTER.
4 Select the VOLUME LEVEL by using the 2¥3
buttons.
If you hook up a just a power amplifier in the sub room the VSX-
27TX/26TX will act as a pre-amp. In this case choose VARIABLE
for the VOLUME LEVEL setting. If you hook up a full integrated
amplifier in the sub room (such as another Pioneer VSX
receiver) choose FIXED for the VOLUME LEVEL setting.
5 Select the IR RECEIVER type with the 5¥∞ buttons
and select the type by using the 2¥3 buttons.
If you have the Pioneer-made MR-100 select PIONEER. If you
have an IR RECEIVER from a different company, select OTHER.
6 Move to the EXIT setting and press ENTER to exit
MULTI-ROOM set up and return to the SYSTEM
SETUP MENU operations.
You can leave the MULTI ROOM set up mode any time by
pressing the SYSTEM SETUP button.
1
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DSP
THX
/dts
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
BAND
SYSTEM
OFF
1
23
4
56
7
89
0
ENTER
Î
¶
873
1¡4¢
+
-
+
-
+
-
MULTI CONTROL
3,4,5
2,6
Multi-Room
Volume Level
[VARIABLE]
IR Receiver
[PIONEER]
[EXIT]
CAUTION : If the "FIXED"
position is chosen, the
volume will be loud.
memo
• Some IR RECEIVERS may not work with this system,
check with a PIONEER representative to be sure.
• For the VSX-24TX the VOLUME LEVEL is set to FIXED
and the IR RECEIVER is set to PIONEER.
Using Other Functions
CAUTION!
If the MULTI ROOM is set to FIXED the
volume on the main unit will be set to
maximum. Thus, when output, it will be
extremely loud. Please set the master
volume controls of the integrated amplifier
in the sub room very low at first and
experiment to find a suitable volume.