Filter
Top Products
64
Using Other Functions
Performing multi operations
Follow the procedures below to perform multi operations which you programmed in the section before this.
1 Press the MULTI OPERATION button on the
remote control.
The MULTI CONTROL buttons start to blink.
2 Press the MULTI CONTROL button that has been
set up with multi operations.
The power of the main unit goes on, it switches to the
appropriate function, and the programmed multi operations
are performed automatically.
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
MD/
TAPE1
TUNER
TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
BAND
SYSTEM
OFF
1
23
Î
¶
873
1¡4¢
+
-
+
-
+
-
MULTI CONTROL
1
2
6 Repeat steps 4 and 5 to input MULTI
OPERATIONS for the components and
commands you want to input. You can also tell
the receiver to go into a specific sound mode
(THX, ADVANCED, STANDARD, MIDNIGHT, DSP
or STEREO) by inputting that command (for
example, see operation 4 below).
You can repeat this process for up to five
commands.
For example : you could enter the following four operations
using the proceeding steps four and five.
1 Press TV CONT button & TV
(POWER) to turn on
your TV (as explained above).
2 Press DVD/LD then (POWER) to turn on your DVD
player (if it is not a PIONEER product).
3 Press DVD/LD then 3 (play) to start playing the DVD
player.
4 Press ADVANCED THEATER mode to put receiver in that
sound mode.
When you employ MULTI OPERATIONS (see below),
these four tasks will be performed in the same order.
7 Press REMOTE SETUP to exit the MULTI-
OPERATION SETUP mode.
The remote control and TV return to their previous
operation modes.
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DSP
THX
/dts
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
BAND
SYSTEM
OFF
1
23
4
56
7
89
0
ENTER
Î
¶
873
1¡4¢
+
-
+
-
+
-
MULTI CONTROL
7
6-
1
6- 2
6- 3
6- 4
Using the system off button
This button will turn off the receiver and any component that has programmed into the MULTI OPERATIONS settings
(see p.63) as well as turn off all PIONEER components regardless of whether they have been programmed into MULTI
OPERATIONS. If you use this feature when a DVD is playing, the player will stop the play mode before switching off.
1 Press the SYSTEM OFF button on the remote
control.
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
RECEIVER
MULTI
OPERATION
SYSTEM
OFF
Î
MULTI CONTROL
1