Pioneer VSX-24TX Stereo System User Manual


 
25
SET
UP
3 Press the 5 or arrow buttons to move the hand
to the mode you want. Then press ENTER.
In each mode, the current settings are displayed automatically.
We suggest you adjust all these settings when you first hook up
the receiver. That gets them out of the way and you won't need
to return to this setting mode unless you change your home set
up by adding new speakers (etc.). The sound set up modes
explained here are:
Speaker Setting (See p.26-27)
Use to specify the type and number of speakers you connected.
Channel Delay (See p.28)
Set up all your speakers for the most realistic surround sound.
Adding a slight delay to some speakers enhances sound
separation and is particularly important for achieving a surround
sound effect. You need to figure out the distance from your
listening position to your speakers to add the proper delay.
Channel Level (See p.29-30)
Use to balance the volumes of your different speakers.
Crossover Network (See p.31)
This feature lets you select which bass frequencies will be sent
to the sub woofer or front speakers.
Bass Peak Level Manager (See p.32)
Dolby Digital and DTS audio sources include ultra-low bass
tones. Set the bass peak level as needed to prevent the ultra-
low bass tones from distorting the sound from the speakers.
D-Range Control (See p.33)
This feature makes possible excellent surround sound effects
when listening to Dolby Digital sources at low volumes.
Digital-In Select (See p.34)
In order to use your digital components you must match the
numbered digital input settings with the numbered digital jacks
used by your digital components.
Multi-Room [VSX-27TX/26TX only] (See p.67-71)
You can set up this unit to power systems in different rooms.
4 Go on to the next page to continue set up.
To exit the SYSTEM SETUP MENU and on-screen
display press SYSTEM SET UP button again.
After you complete one of the SYSTEM SETUP menus and return to the basic SYSTEM SETUP screen (shown
in the diagram directly above labeled 4), the receiver automatically moves the cursor to the next SYSTEM
SETUP menu. For example, if you've completed SPEAKER SETTINGS and returned to the basic SYSTEM
SETUP screen, CHANNEL DELAY will be selected automatically. You can notice this on your TV screen.
memo
3
MENU
ENTER
STEREO
DSP
THX
/dts
MUTE
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
Surround Sound Set Up