Filter
Top Products
30
3 After selecting SETTING START with the ∞ button
press ENTER. The TEST TONE will be output.
These settings will be displayed on your TV.
It takes a moment for the machine to set itself. MASTER
VOLUME rotates to the reference position (0dB), and the test
tone is output.
To exit before outputting the TEST TONE
Press ENTER
To exit while outputting the TEST TONE
Press ENTER.
4 Adjust speaker levels so that you hear the test tone
at the same volume from each speaker when seated
in your main listening position.
NOTE : The volume of the sub-woofer tends to sound lower than
it actually is, you may need to raise its level after testing the
sound with actual soundtracks.
In AUTO mode
1 Press 2 or 3 to adjust the level of the speaker outputting
the TEST TONE.
In MANU mode
1 Press 2 or 3 to adjust the level of the first speaker.
2 Press 5r∞ to switch the TEST TONE to the next speaker.
3 Repeat 1 and 2 for each speaker.
If you are using a Sound Pressure Level (SPL) meter
Take the readings from your main listening position and adjust
the level of each speaker to 75 dB SPL (C-weighted/slow model).
5 When you have adjusted each speaker level, press
ENTER to return to the previous screen
The MASTER VOLUME will return to its original position.
Next, proceed to CROSSOVER NETWORK below.
If you want to change a setting before proceeding.
Simply use the arrow buttons to go back.
6 Select EXIT with the 5r∞ buttons and press ENTER
to return to the SYSTEM SETUP MENU
dB
STEREO
SIGNAL
SELECT
ANALOG
SP
A
AUTO
VOLUME
[ 0dB]
[ 0dB]
[ 0dB]
[ 0dB]
[ 0dB]
[ 0dB]
Channel Level
Front L
Center
Front
Surround
Surround
Subwoofer
L
R
R
L
Test Tone [ AUTO ]
[Setting OK ]
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DSP
THX
/dts
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
BAND
SYSTEM
OFF
1
23
4
56
7
89
0
ENTER
Î
¶
873
1¡4¢
+
-
+
-
+
-
MULTI CONTROL
3,4
Surround Sound Set Up
It is possible to set channels levels
independently for
Surround/dts,
STEREO, EXTERNAL DECODER and
each DSP mode for listening-once
purposes (see p.22 6) but if you do
so these levels will remain in
Surround/dts setup mode unless put
back to zero. They will show up the
display in step 3.
memo