Filter
Top Products
63
SET UP OPERATION
OPERATION
Multi Operations
Multi operations allow you to tell the receiver and your other components to do a number of things with the push of
just two buttons on the remote control. For example, you can program the unit to turn on your TV, turn on your DVD
player, go into a specific sound mode and start playing the loaded DVD. This feature allows you to decide which
operations you want performed as well as the order in which you want them performed.
The steps below show you how to program a string of up to 5 different operations based on eight possible
components. You don't need to program the power of this unit, or any PIONEER product, to go on, it/they will do so
automatically when the MULTI OPERATION function is used. Also, for some DVD players you won't need to program a
play command. Most DVDs will start to play automatically if their power goes on and a DVD is loaded.
Be sure to recall or teach the remote control commands for each component before attempting MULTI
OPERATIONS (see “Setting Up the Remote Control to Control Other Components,“ p. 48).
Using Other Functions
1 Turn on your TV and the receiver.
Make sure your TV is set to the appropriate video input (for
example, VIDEO 1).
2 Press REMOTE SETUP and
3
at the same time
to select the MULTI OPERATION SETUP mode.
The REMOTE SETUP menu appears on your TV screen. The
MULTI CONTROL and the SYSTEM OFF buttons start to blink.
To cancel MULTI OPERATION SETUP mode
Press REMOTE SETUP.
3 Press the MULTI CONTROL button that you want
to use to start the MULTI OPERATION.
You can use any MULTI CONTROL button for this procedure.
It doesn't matter which one you choose but for example
purposes we'll use the DVD/LD button.
This MULTI CONTROL button will be used when you want to
recall the MULTI OPERATION commands for use (see the
next page: "performing multi operations").
Also, the SYSTEM OFF button will blink but can't be used to
recall MULTI OPERATION commands. See the next page for
instructions how to use the SYSTEM OFF button.
4 Press the MULTI CONTROL button for the
component whose operation you want to start
MULTI OPERATIONS with (for example, TV CONT
button).
The selected button will light steadily.
• Each button can perform various preset multi operations
(see step five on the next page).
5 Press the operation, for example TV (POWER),
you want to input.
memo
Multi-operation
1Select an item from the
Multi-Contorol buttons.
(ex. DVD)
2Select the operation
button. (ex. DVD = MENU)
3First command has been
learned.
4You can repeat this
proccess for 5 commands.
EXIT=Remote setup
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DSP
THX
/dts
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
BAND
SYSTEM
OFF
1
23
4
56
7
89
0
ENTER
Î
¶
873
1¡4¢
+
-
+
-
+
-
MULTI CONTROL
1
2
2
3,4
5