Filter
Top Products
21
SET UPPREPARATION
STANDBY/ON
DSP
MODE
TAPE 2
MONITOR
INPUT
SELECTOR
MASTER
VOLUME
MIN MAX
THX CINEMA ADVANCED STANDARD
PHONES
S-VIDEO
5-CHANNEL EQUAL POWER OUTPUT
VIDEO
EXTERNAL
DECODER IN
SIGNAL
SELECTDIRECT LOUDNESSMIDNIGHT
DIGITAL
NR
CLASS FM/AM
TUNER CONTROL
MEMORYMPXINPUT ATTSPEAKERS
-
TUNING +
-
STATION +
-
TREBLE +
-
BASS +
L AUDIO R
VIDEO INPUT
FL
DIMMER
STANDBAY
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
STEREO
/DTS
N∫m¿<¯ım
=~! @#$ %
^&*()_+¡™
Displays & Controls
# DIGITAL NR button
(See p.41)
Switches the DIGITAL NR on or off (STEREO mode
only).
$ SIGNAL SELECT button (See p.40)
Use to select the type of signal being input into the
receiver.
SIGNAL SELECT repeatedly to select one of the
following:
ANALOG : To select an analog signal.
DIGITAL : To select a optical or coaxial digital signal.
% TUNER CONTROL button (See p.44-47)
CLASS : Press repeatedly to switch the preset station
classes.
FM/AM : Press to select the AM or FM band.
TUNING –/+ : Use to manually tune to radio stations.
^ STATION –/+ buttons (See p.46-47)
Use to choose programmed radio stations.
& MEMORY button (See p.46)
Press to start the memorization of a preset station.
* MPX button (See p.44)
Press to switch between auto stereo and MONO
reception of FM broadcasts. When the broadcast
signal is weak, selecting MONO will improve the
sound quality.
( INPUT ATT button
Use to lower the input level of an analog signal that is
too powerful, thus causing the receiver to distort (the
overload indicator will light furiously).
) TREBLE (–/+) button (See p.43)
Use to adjust the high frequencies.
_ BASS (–/+) button (See p.43)
Use to adjust low frequencies.
+ SPEAKERS (A/B) buttons
A is the primary setting. It plays all speakers hooked
up to the A system. A & B setting only plays the front
speakers of both the A & B systems and the sub-
woofer. Multi channel sources will be down-mixed to
these speakers so no sound will be lost. B setting
only plays the front speakers connected to the B
system and multi channel sources will be down-
mixed to these two speakers.
¡ VIDEO INPUT jacks (See p.9)
S-VIDEO : Video input for connecting a video camera
(etc.), that has an S-Video out.
VIDEO / AUDIO (L/R) : Video input for connecting a
video camera, etc. that has standard video/audio
outputs.
™ PHONES jack
Connect headphones for private listening (no sound
will be heard through the speakers)
3
3 3 3
A A+B
OFF
B
VSX-24TX