Pioneer VSX-24TX Stereo System User Manual


 
24
Setting Up for Surround Sound
To ensure the best possible surround sound, be sure to complete the following set up operations. This is particularly
important when using the HOME THX CINEMA , DTS,
(Dolby) Surround sound modes. You only need to make these
settings once (unless you change the placement of your current speaker system or add new speakers, etc.). These set
up operations use your TV to display the settings and choices so be sure your TV and receiver are properly hooked up.
1 Turn on the receiver and your TV.
Make sure your TV is set to the receiver.
2 Press SYSTEM SETUP button.
The SYSTEM SETUP MENU appears on your TV screen.
* You can escape from this screen at any time by pressing the
SYSTEM SETUP button again. None of the settings you made
will be entered in this case.
System Setup
[Speaker Setting]
[Channel Delay]
[Channel Level]
[Crossover Network]
[Bass Peak Level Manager]
[D-Range Control]
[Digital-In Select]
[Multi-Room]
dB
STEREO
SIGNAL
SELECT
ANALOG
SP
A
AUTO
VOLUME
1
2
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DSP
THX
/dts
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
BAND
SYSTEM
OFF
1
23
4
56
7
89
0
ENTER
Î
873
1¡4¢
+
-
+
-
+
-
MULTI CONTROL
memo
Only the VSX-27TX and 26TX models have a MULTI
ROOM function (see p.67-71).
On Screen Display
There are a number of possible ways to hook up the receiver to your video components, like a DVD player, and hook up
to your receiver to your TV, but some of them won't allow you to use the on-screen display of this unit. To avoid this
one simply needs to follow two rules.
1Always use the same type of video cords to hook up your video components to the receiver as you use to hook up
the receiver and your TV. For example, if you use composite video cords to hook up your DVD and the receiver, use
composite video cords to hook up the receiver to your TV. If you use S video cords to hook up your DVD and the
receiver, use S video cords to hook up the receiver to your TV.
2Always make sure your TV is set to the appropriate input channel (for example, video 1). Your TV may have a
number of input channels and if you don't select the proper one you won't be able to use this receiver's on-screen
display, or, in fact, see any picture from this receiver at all. If you are unsure how to choose an input channel for your
TV, refer to the manual which came with your TV.
Surround Sound Set Up
You might, for example, use both composite and S video cords to hook up your video components with this receiver
and then use composite video cords to hook up this receiver to your TV. This arrangement would still NOT let you see
the on screen displays from this receiver on your TV. The best idea is just to use one type of video cord for all your
video component and TV hook ups.