Filter
Top Products
51
OPERATION
3 inches
5 Press the button to be programmed.
The MULTI CONTROL button lights steadily.
• The TV POWER, TV FUNC and TV VOL +/– buttons are only
available for learning when programming TV CONTROL
operations.
6 Point the remote controls at each other and press
the button on the other remote control for the
operation you wish to program .
1 Point the remote controls toward each other.
2 Hold down the button on the other remote control
corresponding to the operation you wish to program.
Release when the MULTI CONTROL button on the receiver's
remote control starts blinking.
(The MULTI CONTROL button blinks to indicate that the
operation has been learned.)
To program additional operations for the current component
Repeat steps 5 and 6.
To program operations for another component
Repeat steps 4 through 6.
7 Press REMOTE SETUP to exit the LEARNING SETUP
mode.
The remote control and TV return to their previous operation
modes.
5
S0URCE
DVD/LD TV/SAT
VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DSP
THX
/dts
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
BAND
SYSTEM
OFF
7
0
ENTER
Î
¶
873
1¡4¢
+
-
+
-
+
-
MULTI CONTROL
32
1
4
56
98
7
Remote Control of Other Components