Pioneer VSX-24TX Stereo System User Manual


 
38
1 Select the sound mode.
For HOME THX CINEMA \ Press THX
For ADVANCED THEATER \ Press ADVANCED
THEATER
Each press changes the ADVANCED THEATER mode as
follows:
For STANDARD \ Press STANDARD
For DSP modes \ Press DSP repeatedly
Each press changes the DSP mode as follows:
For STEREO \ Press STEREO
Selecting a Sound Mode
To ensure the best possible surround sound, be sure to complete the set up procedures described in “Setting Up for
Surround Sound” (starting on page 24) before using the sound modes. This is particularly important when using the
(Dolby) Digital or DTS sources. When using the sound modes, using SPEAKERS A will give the best results. If you use
SPEAKERS B the sound will be down mixed to the two front B speakers and the surround sound effect will be lost.
Surround operation
= MUSICAL = DRAMA = ACTION
5-D THEATER +
= HALL 1 = HALL 2 = JAZZ = DANCE
THEATER 2 + THEATER 1 +
memo
DSP STEREO
THX
CINEMA
ADVANCED
STANDARD
ENTER
STEREO
DSP
THX
/dts
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
SYSTEM
SETUP
SIGNAL
SELECT
STANDARD
ADVANCED
THX
DSP
STEREO
Basic Playback
The effects of ADVANCED THEATER mode can be adjusted
in the range of 10 to 90 by pressing EFFECT –/+ (The default
setting is 70). Also, the effect level can be set in each
ADVANCED THEATER mode by pressing the EFFECT(–/+)
button. 5-D THEATER modes cannot be changed.
The amount of effect of each DSP mode can be adjusted in
the range of 10 to 90 (the default setting value is 70) by
pressing EFFECT –/+.
When a digital input is selected, using some discs with a
huge amount of information may cause the overload
indicator to light up. If the overload indicator is lit in the
THX, ADVANCED THEATER and DSP mode, the signal may
be distorting. To ensure there's no distortion you can switch
to the STANDARD mode.
VSX-27TX