Filter
Top Products
Controls and displays
03
29
En
11 Front panel controls
To access the front panel controls, push gently on the
lower third portion of the panel with your finger.
12 ACOUSTIC CAL. (page 44)
Press to switch Acoustic Calibration EQ on or off.
13 MIDNIGHT (page 48)
Press to switch MIDNIGHT mode on/off.
14 LOUDNESS (page 48)
Press to switch LOUDNESS mode on/off.
15 TONE
Press to switch between TONE ON and TONE BYPASS,
which bypasses the tone controls.
16 OPTION (–/+)
Press OPTION repeatedly to select an option menu item,
then use –/+ to adjust the settings.
17 DIGITAL NR (page 49)
Press to switch DIGITAL NR on/off.
18 INPUT ATT (page 70)
Press to switch the input attenuator on/off.
19 CH LEVEL (SELECT/–/+) (page 54)
Press SELECT repeatedly to select a channel, then use –/+
adjust the level.
20 SB CH MODE (page 46)
Use to select the surround/virtual back channel mode.
21 PHONES jack (page 42)
Use to connect headphones (no sound will be heard
through the speakers).
22 SP SYSTEM A/B (page 75)
Press repeatedly to select speaker system A,B, A/B or off
(in that order). (See Caution on page 75 for exceptions to
this).
23 SIGNAL SELECT (page 44)
Press to select the type of input signal for the current
source (DVD, DVR/VCR, etc.), and also to select the
number of input channels for the USB and analog
multichannel inputs.
24 VIDEO SELECT (page 70)
Press repeatedly to select the video source.
25 TAPE 2 MONITOR (page 69)
Press to monitor recordings on the device connected to
the TAPE 2 MONITOR inputs/outputs as they are being
made.
26 STREAM DIRECT (page 43)
Press to switch on/off Stream Direct.
27 SETUP MIC jack
Use to connect the supplied microphone.
28 VIDEO INPUT jacks (page 23)
• DIGITAL IN – Connect a game console, portable DVD
player, video camera (etc.), that has an optical digital
connection.
• S-VIDEO – Connect a video camera (etc.), that has an
S-video out.
• VIDEO / AUDIO (L/R) – Connect a video camera, etc.
that has standard RCA video/audio outputs.