Filter
Top Products
9
Parts and their functions
H/F button
This sets the heater/fan function ON or OFF when a pan/
tilt head (AW-PH600/AW-PH650) equipped with a heater/
fan function is used in the pan/tilt head system currently
selected.
Each time it is pressed, the function is turned ON or OFF
in turn.
When the heater/fan is ON, the button’s lamp comes on;
when it is OFF, the heater/fan goes off.
EXT (AF) button
If a lens with an extender function is used in the selected
pan/tilt head system, the extender function is set from ON
to OFF or vice versa each time the EXT (AF) button is
pressed.
If a lens (AW-LZ16AF7G) with an AF function is used in
the selected pan/tilt head system, the AF function of the
lens is set from ON to OFF or vice versa each time the
EXT (AF) button is pressed.
In either case, the button lamp is lighted at the ON
setting, and it is extinguished at the OFF setting.
This button can be used to turn the AF function ON or
OFF only when the AW-PH350/AW-PH360/AW-PH650
pan/tilt head is connected.
When the pan/tilt head is not used and only the camera
is connected, select ON or OFF using the menu item.
ND button
This sets the ND filter function ON or OFF when a lens
equipped with an ND filter function is used in the pan/tilt
head system currently selected.
Each time it is pressed, the function is turned ON or OFF
in turn.
When the ND filter is ON, the button’s lamp comes on;
when it is OFF, the lamp goes off.
OP button
This controls the short- or open-circuiting of the OPTION
SW CONTROL OUT connector of the AC adapter
(AW-PS300A) which is connected to the pan/tilt head
system currently selected.
Each time it is pressed, short-circuiting or open-circuiting
is selected in turn.
When the connector is short-circuited, the button’s lamp
comes on; when it is open-circuited, the lamp goes off.
LAMP button
This controls the ON and OFF of the halogen lamp
which is connected to the pan/tilt head system currently
selected.
Each time it is pressed, the lamp is turned ON or OFF in
turn.
When the halogen lamp is ON, the button’s lamp comes
on; when it is OFF, the lamp goes off.
It flashes when the halogen lamp has not been
connected or when the lamp has been disconnected or
some other problem has occurred.
SPEED button
This is used to select the control (pan, tilt, zoom, focus,
iris) speed of the pan/tilt head system currently selected.
Each time it is pressed, the high-speed mode or
low-speed mode is selected in turn.
The button’s lamp comes on in the low-speed mode, and
it remains off in the high-speed mode.
By pressing the SPEED button while holding down
the MEMORY button, it is possible to set whether the
high-speed mode or low-speed mode is to be selected
when the power is turned on (or at OPERATE ON).
1
LEVEL
IRIS
OPERATE
CAM
CONT
2 3 4
ATW
ITEM
DEF
WIP
H/F
(AF)
EXT
LAMP
ND OP
SCENE FILE
PRESET
MENU
YES
NO
B
A
SHUTTER
MODE
GAIN
5
2
ON
OFF
ON
OFF
3 4 5
ABC
MEMORY
MENU
Multi Hybrid Control Panel AW-RP555
AWC
OK
NG
WHT BAL
3
2
1
USER
TALLY
CONTROL
HIGH
LOW
TELE
WIDE
FAR
LEFT RIGHT
UP
DOWN
NEAR
MANU
AUTO
SPEED
ZOOM
FOCUS
PAN/TILT
1 2 3 4 5
6 7 8 9
10
MANU
AUT
O
0dB
L
H
CAM
BAR