Filter
Top Products
29
Power supply: DC 10.8 V to DC 16 V
Power consumption: 9.0 W
General
Ambient operating temperature
14°F to 122°F (–10°C to +50°C)
Storage temperature
–4°F to +140°F (–20°C to +60°C)
Ambient operating humidity
30% to 90% (no condensation)
Weight
3.1 lbs. (1.4 kg)
Dimensions (WHD)
8-1/4”6-15/16”2-5/16” (21017758 mm)
(excluding protrusions)
Finish
AV ivory paint (color resembling Munsell 7.9Y 6.8/0.8)
Pan/tilt heads supported
AW-PH300, AW-PH300A, AW-PH350, AW-PH360,
AW-PH500, AW-PH600, AW-PH650
Cameras supported
AW-E300, AW-E300A, AW-E600, AW-E800, AW-E800A,
AW-E350, AW-E650, AW-E655, AW-E750, AW-E860
Input connectors
DC 12V IN socket
DC jack
GND
Please ground before using the unit.
Output connectors
MONITOR SELECT connector
RJ45
Connecting cable:
10BASE-T straight cables (UTP category 5),
max. 164 feet (50 meters)
Input/Output connectors
TALLY
D-SUB, 15-pin
REMOTE/SERVICE
RS-232C
TO PAN/TILT HEAD [1/EXT, 2 to 5] connectors
RJ45 5, control signal output for pan/tilt heads
Connecting cable:
10BASE-T straight cables (UTP category 5),
max. 3,280 feet (1,000 meters)
Other
REMOTE/SERVICE switch
Maintenance switch. Set in the “R” position during use.
ZOOM REVERSE switch
Used to reverse the polarity of the ZOOM lever.
ZOOM/FOCUS EXCHANGE switch
Used to replace the ZOOM lever with the FOCUS lever or
vice versa.
FOCUS REVERSE switch
Used to reverse the polarity of the FOCUS lever.
TILT REVERSE switch
Used to reverse the polarity of the TILT lever.
PAN REVERSE switch
Used to reverse the polarity of the PAN lever.
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
Specifications
indicates safety information.