Filter
Top Products
25
Setting procedure
1. Keep pressing the MENU/ button for two seconds.
The menu mode is established, and the on-screen
menus of the camera in the pan/tilt head system
currently selected are displayed. At this point, the
MENU/ button lamp remains lighted.
If the MENU/ button is held down for at least two
seconds while the MENU/ button lamp is lighted, the
menu mode is exited, and the on-screen menus can be
closed.
2. When the unit is in MENU mode, the MENU/ button,
ITEM/ button, YES/ button and NO/ button
correspond to the 4 switches on the back of the
convertible camera as shown below. The MENU is
operated using these buttons.
MENU/ .......MENU
ITEM/ .........ITEM/AWC
YES/ .........YES/ABC
NO/ ..........NO/BAR
For details about MENU operations, refer to the
operating instructions of the camera.
3. Upon completion of the settings, keep pressing the
MENU/ button for two seconds to exit the menu mode.
The on-screen menus are now cleared, and the MENU/
button lamp goes off.
Setting and changing the camera menu items
Do not close the on-screen menus by performing
menu operations.
If the menus have been closed by mistake, keep
pressing the MENU/ button for at least two seconds
to turn off the MENU/ button lamp.