Filter
Top Products
14
Connections
Use the AW-PS505A (sold separately) AC adapter for this
unit and the AW-PS300A (sold separately) for the pan/tilt
head.
Use a DC power cable (which has a nominal cross-
sectional area of at least 1.25 mm
2
and which complies
with the Electrical Appliance and Material Control Law) to
connect the AW-PH360 pan/tilt head and AW-PS300A AC
adapter.
The maximum extension distance between the AC
adapter for the pan/tilt head and the pan/tilt head itself is
98.4 feet (30 meters).
Connect the AW-PH360 pan/tilt head and convertible
camera using the camera cable supplied with AW-PH360.
Connect the iris control cable of the motorized zoom lens
to the camera and the remote (zoom/focus control) cable
to the pan/tilt head.
When using the AW-PH360 as the pan/tilt head, set the
controller selector switch on the AW-PH360 to “For
AW-RP605A”.
Turn off the power of all components before
proceeding with the connections.
For further details on how to connect each component,
refer to the operating instructions of the component
concerned.