Filter
Top Products
21
4. Set the left end position in the travel range.
Operate the PAN/TILT lever to rotate the camera to
the position which is to serve as the left end position.
Press the PRESET 1 and 6 buttons while holding
down the MEMORY button.
When the button 5 lamp lights, the setting is
completed.
To cancel the setting, press the PRESET 1 and 6
buttons again while holding down the MEMORY
button. When the setting is canceled, the button 10
lamp lights.
5. Set the right end position in the travel range.
Operate the PAN/TILT lever to rotate the camera to
the position which is to serve as the right end position.
Press the PRESET 4 and 9 buttons while holding
down the MEMORY button.
When the button 5 lamp lights, the setting is
completed.
To cancel the setting, press the PRESET 4 and 9
buttons again while holding down the MEMORY
button. When the setting is canceled, the button 10
lamp lights.
6. Use the CONTROL button to switch the pan/tilt head
system. and set the travel ranges (limiters) for each
system concerned.
Genlock adjustment
If a camera is to be synchronized with an external signal for
use, genlock adjustment must be performed for the camera
and other equipments.
Either the black burst or VBS (video, burst and sync) signal
is used for the external sync signal.
There is no need to perform the genlock adjustment if the
camera is not going to be synchronized with an external
signal.
For the genlock adjustments, open the camera menu and
perform the settings. Refer to the instructions accompanying
the camera and cable compensator.
Total pedestal adjustment
When more than one camera is to be used, the black level
(pedestal level) of the pictures shot by each of the cameras
must be brought into alignment.
Set the black level (pedestal level) using the camera menu.
For details, refer to the instructions accompanying the
camera.
Operation
1
LEVEL
IRIS
OPERATE
CAM
CONT
2 3 4
ATW
ITEM
DEF
WIP
H/F
(AF)
EXT
LAMP
ND OP
SCENE FILE
PRESET
MENU
YES
NO
B
A
SHUTTER
MODE
GAIN
5
2
ON
OF
F
ON
OF
F
3 4 5
ABC
MEMORY
MENU
Multi Hybrid Control Panel AW-RP555
AWC
OK
NG
WHT BAL
3
2
1
USER
TALLY
CONTROL
HIGH
LOW
TELE
WIDE
FAR
LEFT RIGHT
UP
DOWN
NEAR
MANU
AUTO
SPEED
ZOOM
FOCUS
PAN/TILT
1 2 3 4 5
6 7 8 9 10
MANU
AUTO
0dB
L
H
CAM
BAR