Filter
Top Products
27
How to change the position of the connector panel
TALLY5
TALLY3
TALLY1
TALLY2
TALLY4
TALLY GND
R
5 4 3 2
1/EXT
S
TALLY IN
REMOTE/SERVICE
TO PAN/TILT HEAD
MONITOR SELECT
DC12V IN
GND
TALLY5
TALLY3
TALLY1
TALLY2
TALLY4
TALLY GND
R
5 4 3 2
1/EXT
S
TALLY IN
REMOTE/SERVICE
TO PAN/TILT HEAD
MONITOR SELECT
DC12V IN
GND
Screws × 4 (bottom panel)
Screws × 4 (rear panel)
Screws × 4 (bottom panel)
Screws × 4 (rear panel)
Connector panel
Remove the connector panel.
Remove the blank panel.
Blank panel
Remove the two rubber feet.
The position of the connector panel can be changed from
the rear panel to the bottom panel.
Before changing the position, turn off the power.
Remove the four bottom panel screws, and remove the
blank panel.
Remove the four rear panel screws, and remove the
connector panel.
Secure the blank panel to the rear panel using the screws.
Secure the connector panel to the bottom panel using the
screws.
Remove the two rubber feet from the blank panel.