Onkyo CR-N1 CD Player User Manual


 
48
Using the timer (remote controller only)
5 If you selected the FM or AM source, use
the SETTING ( / ) buttons to select a
preset station.
6 Press the STANDBY/ON button to enter
Standby mode.
At the specied ON time, the CR-N1 will
automatically turn on and play the speci-
ed source. Make sure that the volume is
set at an appropriate level, and if youve
programmed the timer for CD playback,
dont forget to load a disc. At the speci-
ed OFF time, the CR-N1 will automati-
cally turn itself off.
If you congure a day as both a weekday
and a weekend day, for example, to turn
the CR-N1 on and off twice on that day,
leave at least one minute between the
rst timers OFF setting and the second
timers ON setting. If the second timers
ON setting occurs before the rst timers
OFF setting, the second timers settings
will be ignored.
If the sleep timer function is turned on
during a timers ONOFF period, the
CR-N1 will automatically enter Standby
mode after the specied sleep time has
elapsed, ignoring the timers OFF setting.
The timer still works when the Energy
Save function is on.
The timers can be turned on and off inde-
pendently as follows.
Note that a timer cannot be turned on unless
it has been programmed.
1 Press the TIMER button repeatedly to
select the WEEKDAY or WEEKEND timer.
2 Use the SETTING ( / ) buttons to turn
the timer on or off, and then press the
ENTER button.
When the Weekday timer is on, W.DAY
is displayed, and when the Weekend
timer is on, W.END is displayed.
TIMER
STANDBY/ON
ENTER
SETTING ( / )
MHz
TIMER
W.DAY
Turning the timers on & off
or
TIMER
W.DAY