26
Getting connected
• Do not connect the AC power cord to a wall outlet until you’ve completed all other con-
nections, including speakers (see page 18) and antenna (see page 23).
• For audio connections, the red connector (marked “R”) corresponds to the right channel,
and the white connector (marked “L”), to the left channel. Always connect white plugs to
connectors labeled “L,” and red plugs to the connectors labeled “R.”
• Refer to the relevant instruction manuals when connecting other equipment to the CR-N1.
• Loose connections can cause noise or abnormal operation, so
make sure that plugs are inserted correctly.
• Do not bend, tie, or coil optical digital audio cables.
• For optimum sound quality, keep audio cables away from
power cords and speaker cables.
An analog recorder such as a cassette deck can be connected to the CR-N1’s LINE IN/OUT
phono jacks for tape playback and recording, as shown. Only the selected source signal is out-
put from the LINE OUT, not the USB Mix.
Connection notes
(White) To “L” connector
(Red) To “R” connector
Audio connection cable
To “L” connector (White)
To “R” connector (Red)
Incorrect
Correct
Connecting an analog recorder
Audio
connection
cable x 2
Stereo cassette deck