Filter
Top Products
30
Basic operation
1 Press the STANDBY/ON ( ) button on
the CR-N1 or remote controller.
The display lights up and the CR-N1 is
ready for use.
Press the STANDBY/ON ( ) button again
to enter Standby mode.
Note: If you turn the CR-N1 on or off, or
connect or disconnect the USB cable while
your computer is outputting sound (e.g.,
playing back audio), or while launching
audio playback software, your computer
may become unstable. Always quit audio
playback software before turning the
CR-N1 on or off, or before connecting or
disconnecting the USB cable.
If the CR-N1 is turned on or off fre-
quently, or the USB cable connected or
disconnected frequently while your com-
puter is up and running, in some cases
your computer may stop operating nor-
mally. In this case, you should restart your
computer.
The Energy Save function reduces power
consumption while the CR-N1 is in Standby
mode.
1 In Standby mode, press the ENERGY
SAVE button on the CR-N1 (the ENERGY
SAVE indicator lights up and the clock
display disappears).
2 To turn off Energy Save mode, press the
ENERGY SAVE button again.
The Energy Save function can be turned
on or off while the CR-N1 is either on or
in Standby mode. When the ENERGY
SAVE button is pressed while the CR-N1 is
on, although the ENERGY SAVE indicator
lights up, Energy Save mode is not
engaged until the Standby mode is
selected by pressing the STANDBY/ON ( )
button.
Although the clock display is turned off in
Energy Save mode, the timer functions
still work.
STANDBY/ON
ENERGY SAVE
STANDBY/ON
ENERGY SAVE
indicator
Turning the CR-N1 on & off
Remote controller
Using Energy Save