Filter
Top Products
22
Getting connected
Removing the speaker grilles
The D-N1 speakers can be used either with or
without the grilles, which can be removed
and replaced as follows.
1. Hold the grille at the top using both
hands and pull it gently away from the
speaker to release the top two fasteners.
2. Hold the grille at the bottom using both
hands and pull it gently away from the
speaker to release the bottom two
fasteners.
3. To replace the grille, line up the top and
bottom fasteners and gently push the
grille onto the speaker.
Note:
Do not attempt to carry the speaker by hold-
ing only its grille. Carry the whole speaker.
There is a risk that the speaker will be
dropped if the grille separates from the cabi-
net.
Speaker care
Onkyo uses a very high quality polymer lami-
nate covering to protect its wooden speaker
cabinets. To maintain their appearance, you
should periodically wipe them with a soft dry
cloth. Stubborn stains can be removed by
using a soft cloth dampened with water and
a mild detergent. Do not use furniture polish
or strong cleaning solutions. Dust and lint
can be removed from the speaker grilles by
using a soft brush, or a vacuum cleaner with
a brush attachment.
D-N1 Specifications
Specifications and features are subject to
change without notice.
Type 2-way bass reflex
Impedance 4Ω
Maximum input
power
30 watts
Output sound
pressure level
83 dB/W/m
Frequency
response
63 Hz–35 kHz
Crossover
frequency
3 kHz
Cabinet capacity 2.6 liter
Speakers
Woofer: 9 cm cone x1
Tweeter: 2.5 cm dome x1
Dimensions
(W x H x D)
165 x 271 x 160 mm
(6-1/2" x 10-11/16" x 6-5/16")
Weight 1.7 kg (3.7 lbs)
Others
Magnetic shielding
Symmetrical type
Supplied
accessories
1 meter speaker cable x2