Filter
Top Products
34
RECEIVE unit
Delay Menu
RECEIVE unit
PORT 1 + PORT 2 delayed
A: Delay Menu - RECEIVER – ~/MENU A A
Enters the delay menu for a MultiMAX (set for
RECEIVE mode). Each RECEIVE unit can have its
own delay for sequences or for synchronization. To
easily delay all RECEIVE units the same amount, use
the Transmitter’s delay.
N RECEIVE units set to delay do not perform
confirmation.
A: PORT 1 + PORT 2
– ~/MENU A A A
Enters the numeric entry screen. PORT 1 and
PORT 2 are delayed the same amount and trigger
simultaneously after the set delay time. Both ports
remain contacted for the set contact time. Triggers
can come from either the TEST key or a radio trigger
from any PocketW izard Transmitter. On the main
display a small letter D will appear to denote that
PORT 2 will be delayed.
L Pressing L will toggle Relay Mode on and off but PORT 2 will still trigger after the
set delay. See the Relay Mode section, Page 40, for more information.
B: PORT 2
– ~/MENU A A B
Enters the numeric entry screen. PORT 1 triggers immediately upon pressing TEST
key or Radio Trigger. PORT 1 contact is held for the set delay time. PORT 2 triggers
after the set delay time and contact is held for the set contact time.