MaxTech Transceiver Satellite Radio User Manual


 
25
EXAMPLE 1
Numeric Entry
EXAMPLE 2
Numeric Entry
Numeric Entry
Several menu items require a number or value to be
entered. Numeric entry is performed with A B C D
and  keys. The A B C D keys each select and
add 1 to a specific digit as follows:
A – selects and adds 1 to the 4
th
digit from the right
B – selects and adds 1 to the 3
rd
digit from the right
C – selects and adds 1 to the 2
nd
digit from the right
D – selects and adds 1 to the rightmost digit
Once a digit has been selected, use the  keys to
adjust the number. Press and hold  for faster
entry.
Numbers entered in this fashion are saved when the
~/MENU key is pressed and will remain saved even
after power is turned off. If the unit is powered off
while a numeric entry screen is displayed, the
displayed number will not be saved.
L The L key is not used for numeric entry. It is
used for Lag Time Measurement and is only
available in certain Delay modes. See the section
on Lag Time Measurement, Page 44, for more
information.
ë To quickly get to the lowest setting press and
release the A key once (selects the highest digit)
then press and hold the key.