Marantz SR6001 Home Theater System User Manual


  Open as PDF
of 71
 
60
ENGLISH
MULTI ROOM
SYSTEM
The Multiroom System mode allows the same source
or different sources to be heard in two rooms other
than where this receiver is installed.
When using the multiroom system, the audio is
output from the MULTI AUDIO output terminals and
input to the MULTI ROOM amps.
If a surround channel back speaker or speaker C
(see page 24) are not used in the room where this
receiver is installed, the multi speaker system can be
used with the amp for the surround back channel.
This receiver supports multiroom system functions
such as source selectors, OSD menu systems, sleep
timers and remote control.
MULTI ROOM PLAYBACK USING THE MULTI
ROOM OUT TERMINALS
DIGITAL
RLVIDEO
S-VIDEO
AUX 1 INPUT
AUDIO
VOLUME
UP
DOWN
STANDBY
PHONES
INPUT SELECTOR
AV SURROUND RECEIVER SR6001
MultEQ
ENTER
MENU
PURE DIRECT HT-EQ
7.1CH INPUT
MODE AUTO
MULTI
A/B
T-MODE
MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS
BAND
MIC
PURE DIRECT
SURROUND
SPEAKER
MULTI
DSD
POWER ON/STANDBY
L
C
R
SL SSR
LFE
DIGITAL
SURROUND
V-OFFDISP MULTIAUT O TUNED STSPKR A B
NIGHT
PEAK ANALOG
DIGITAL
ATT
SLEEP
SURR DIRECT
AUTO
DISC 6.1 MTX 6.1 EQ
PCM
AAC
READY
2. 3.1. 4.
CAT
CAT
-
T.DISP
F.DIRECT
PTY
TUNING
PRESET
-
++
+10
REMOTE CONTROLLER
RC5001SR
00
TAPE
HT-EQ
MULTI/
MENU
SPKR A/B
ENTER
EXIT
INFO
CH/
T.TO NE
/SET UP
M-SPKR
MUTE
MD
CDR
CD
AMP
AUX2
TUNER
BASS
TREBLE
REC
AUDI O
ANGLE
SUB TITLE
DISC+
CH-SEL
V-OFF
ATT.
AUX1
A/D
MEMO
CL
DVDDVD VCRVCR
DSSDSS
TVTV
VOLUMEVOLUME
7.1CH IN7.1CH IN
3.
1. 4.
2.
1. 4.
1.
Press the MULTI button on the unit or remote
control (after pressing the AMP button on the
remote control). The unit enters MULTI ROOM
mode, and the display indicates “SELECT
SOURCE.” The “MULTI” indicator will fl ash for
about 10 seconds.
2.
Select the input source using the INPUT
SELECTOR knob or function button on the
remote control.
Then, the display indicates “MULTI VOLUME”
“MULTI VOL. xx” for approx. 5 seconds.
3.
During this time, you can set the volume level in
the multi room as desired.
This will only set the volume in the second
room.
4.
To cancel this function, press the MULTI button
on the unit or remote control (after pressing the
AMP button on the remote control).
“MULTI” indicator on the front panel will be
turned off.
Note:
• The sleep timer, monaural output and other features
can also be set using the MAIN MENU.
(See page 41)
MULTI ROOM PLAYBACK USING THE MULTI
SPEAKER TERMINALS
The SR6001 allows you to connect another set
of speakers and place them in a different room or
separated area for Iistening to music.
DIGITAL
RLVIDEO
S-VIDEO
AUX 1 INPUT
AUDIO
VOLUME
UP
DOWN
STANDBY
PHONES
INPUT SELECTOR
AV SURROUND RECEIVER SR6001
MultEQ
ENTER
MENU
PURE DIRECT HT-EQ
7.1CH INPUT
MODE AUTO
MULTI
A/B
T-MODE
MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS
BAND
MIC
PURE DIRECT
SURROUND
SPEAKER
MULTI
DSD
POWER ON/STANDBY
L
C
R
SL SSR
LFE
DIGITAL
SURROUND
V-OFFDISP MULTIAUT O TUNED STSPKR A B
NIGHT
PEAK ANALOG
DIGITAL
ATT
SLEEP
SURR DIRECT
AUTO
DISC 6.1 MTX 6.1 EQ
PCM
AAC
READY
2. 3.1. 4.
CAT
CAT
-
T.DISP
F.DIRECT
PTY
TUNING
PRESET
-
++
+10
REMOTE CONTROLLER
RC5001SR
00
TAPE
HT-EQ
MULTI/
MENU
SPKR A/B
ENTER
EXIT
INFO
CH/
T.TO NE
/SET UP
M-SPKR
MUTE
MD
CDR
CD
AMP
AUX2
TUNER
BASS
TREBLE
REC
AUDI O
ANGLE
SUB TITLE
DISC+
CH-SEL
V-OFF
ATT.
AUX1
A/D
MEMO
CL
DVDDV D VCRVCR
DSSDSS
TVTV
VOLUMEVOLUME
7.1CH IN7.1CH IN
3.
1. 4.
2.
1. 4.
1.
Press the MULTI SPEAKER (M-SPKR) button.
The unit enters multi room speaker mode and
the display indicates “SELECT SOURCE” and
fl ashes the “MULTI” indicators for approx. 10
seconds.
2.
Select the input source using the INPUT
SELECTOR knob or function button on the
remote control.
Then, the display indicates “MSPKR VOLUME”
“MSPKR VOL.xx” for approx. 5 seconds.
3.
During this time, you can set the volume level in
the multi room as desired.
This will only set the volume in the multi room.
4.
To cancel this function, press the MULTI button
on the unit or remote control (after pressing the
AMP button on the remote control).
“MULTI” indicator on the front panel will be
turned off.
Note:
• The sleep timer, monaural output and other features
can also be set using the MAIN MENU. (See page
41.)
Notes for Multi Room Speaker
• The MULTI ROOM SPEAKER output terminals can
be used when Surround Back Speaker = “NONE”
in the SPEAKER SETUP menu. (See SPEAKER
SETUP, page 31)
• “The Surr. Back Speakers are in use” is displayed
when the MULTI SPEAKER button is pressed
when the Surround Back Speaker is not set to
“NONE” in the SPEAKER SETUP menu. (See
SPEAKER SETUP, page 31)
• The Multispeaker mode cannot be used at the
same time as the speaker C. When connecting for
multiroom use, set the SPEAKER C selector switch
on the rear panel to OFF.
 previous next