Filter
Top Products
ENGLISH
31
2 SPKR (SPEAKER) SETUP
After you have installed the SR6001 connected all
the components and determined the speaker layout,
it is now time to perform the settings in the Speaker
Setup menu for the optimum sound acoustics for
your environment and speaker layout.
Before you perform the following settings, it is
important that you first determine the following
characteristics:
•
AUTO SETUP:
“2-1 AUTO SETUP (MultEQ Setup)”
(see page 32)
•
MANUAL SETUP:
“2-2 MANUAL SETUP”
(see page 35)
1.
Select “2.SPKR SETUP” from the MAIN MENU
with 3
or
4 cursor buttons and press the
ENTER button.
2.SPKR SETUP
AUTO SETUP
MANUAL SETUP
RETURN EXIT
2.
Select the desired menu with the 3
or
4 cursor
buttons, and press the ENTER button.
Note:
• After you complete this the portion of the setup,
press the ENTER button. The cursor will move to
“RETURN” and press the ENTER button to go to
the Sub-menu.
AUTO SETUP
SPEAKERS CHECK:--
NOW ANALYZING !!
CANCEL
EXIT
AUTO SETUP
AUTO SETUP: START
MAIN ROOM
SURR BACK: 2CH
RETURN EXIT
AUTO SETUP
SPEAKERS CHECK:OK
1ST MIC POSITION!!
START
CHECK
EXIT
CHECK RESULT
SPEAKER CONFIG
SPEAKER SIZE
DISTANCE
CHANNEL LEVEL
CROSSOVER FREQ
STORE
EXIT
SPEAKER SIZE
INI.SET SPKR: YES
SUB W : YES
FRONT : SMALL
CENTER : SMALL
SURR. : SMALL
SURR.B : 2CH
SURR.B SIZE : SMALL
LPF/HPF : 80Hz
BASS MIX :
RETURN NEXT EXIT
2.SPKR SETUP
AUTO SETUP
MANUAL SETUP
RETURN EXIT
SPEAKER LEVEL
TEST MODE : MANUAL
FRONT L : 0.0dB
CENTER : 0.0dB
FRONT R : 0.0dB
SURR.R : 0.0dB
SURR.B R : 0.0dB
SURR.B L : 0.0dB
SURR.L : 0.0dB
SUB W : 0.0dB
RETURN BACK EXIT
AUTO SETUP
NOW ANALYZING!!
CANCEL
AUTO SETUP
______________
NOW CALCULATE !!
SPEAKER DISTANCE
UNIT : ft
FRONT L : 10.0 ft
CENTER : 10.0 ft
FRONT R : 10.0 ft
SURR.R : 10.0 ft
SURR.B R : 10.0 ft
SURR.B L : 10.0 ft
SURR.L : 10.0 ft
SUB W : 10.0 ft
RETURN BACK NEXT EXIT
☞
P. 32
☞
P. 35