Filter
Top Products
ENGLISH
30
1-3 FUNCTION RENAME
Input sources can be registered under any name.
This menu is for renaming input source.
This menu is for renaming function name. Names
can be up to 10 characters long, including spaces.
(Characters are selected from those appearing on
the display.) This name appears on the receiver's FL
display and the OSD, but it does not appear in the
OSD Setup menu.
1.
Select “FUNCTION RENAME” from the 1.
INPUT SETUP menu with the 3
or
4 cursor
buttons and press the ENTER button.
FUNCTION RENAME
FUNCTION: TV
RENAME : TV________
ABCDEFGHIJKLMNOPQRSTUV
WXYZabcdefghijklmnopqr
stuvwxyz0123456789!"#$
%&’()
*
+,
.
./:;<=>?
_{|}SPACE BACK DEFAULT
RETURN NEXT EXIT
__
2.
Select “FUNCTION” with the 3
or
4 cursor
buttons.
3.
Select an input source with the 1
or
2 cursor
buttons.
4.
Select “RENAME” with the 3
or
4 cursor
buttons.
5.
Move the cursor to the character (1st to 10th) to
change with the 1
or
2 cursor buttons.
6.
Move the cursor to the character list with the 4
cursor button. (Move the cursor to the letter “A”
to begin with.)
7.
Select a character with the 3, 4, 1, and 2
cursor buttons.
8.
Press the ENTER button to enter the selected
letter.
9.
Repeat steps 5-8 until the new name is input.
BACK:
Deletes the character left of the cursor in the
“RENAME” area one character at a time.
DEFAULT:
Restores the name in the “RENAME” area to the
name in the “FUNCTION” area.
SPACE:
Inserts a space at the cursor point of the “RENAME”
area.
Note:
• RENAME cannot be left blank.
Move the cursor to “RETURN” with the 3, 4, 1, and
2 cursor buttons and press the ENTER button to go
to the 1. INPUT SETUP menu.