Marantz CDR510 CD Player User Manual


 
- 36 -
PITCH
The playback speed (pitch) of the CD drive can
be changed up to ±12.0% in steps of 0.1%.
Default setting is 0.
Digital signals are not output when pitch control
is on.
Adjusting the pitch lets you tune the CD output to
a musical instrument, useful when practicing
because it permits adjusting the music practice
source to your instrument.
When pitch is active the green PITCH indicator
on the front of the CDR510 is lit and steady.
Pitch settings remain when discs are changed or
if the CDR510 is powered off.
There are two menu controls for pitch, PITCH
and PITCH ON/OFF.
How to adjust the PITCH (menu control)
The PITCH menu control adjusts the pitch.
1. With the CD drive selected push and release
the MENU/STORE button.
2. Turn the REC LEVEL/SELECT control until
PITCH is displayed.
3. Push and release the REC LEVEL/SELECT
control. PI is displayed.
4. Turn the REC LEVEL/SELECT control to
adjust the pitch.
5. When correct push and release the REC
LEVEL/SELECT control. PITCH is displayed
again.
6. Turn the REC LEVEL/SELECT control to
switch to other menu choices or press and
release the CANCL/DELETE button to exit
menu mode.
L
R
ANALOG
CD - RW
CD
L
R
ANALOG
CD - RW
CD
L
R
ANALOG
CD - RW
CD
How to turn the PITCH ON or OFF
The PITCH ON/OFF menu control lets you turn
the pitch on or off without changing the pitch
adjustment when pitch is on. If you turn the pitch
adjustment off and later, if you turn the pitch
adjustment back on, the original pitch setting
remains.
1. With the CD drive selected push and release
the MENU/STORE button.
2. Turn the REC LEVEL/SELECT control until
PITCH ON/OFF is displayed.
L
R
ANALOG
CD - RW
CD
3. Push and release the REC LEVEL/SELECT
control. ON or OFF is displayed.
4. Turn the REC LEVEL/SELECT control to
toggle between ON and OFF.
5. When correct push and release the REC
LEVEL/SELECT control. PITCH ON/OFF is
displayed again.
6. Turn the REC LEVEL/SELECT control to
switch to other menu choices or press and
release the CANCL/DELETE button to exit
menu mode.
Example
display