Marantz CDR510 CD Player User Manual


 
- 35 -
COPY protection
All pre-recorded audio CDs include a digital mark
indicating the copy protection status of the disc.
This information is stored in the user data area of
the CD and is transmitted in the SPDIF format
digital output.
Analog sources do not carry copy protection.
Because the CDR510 is a professional CD
recorder, it will record from any digital source,
ignoring the copy protection setting of the source
material. The CDR510 allows you to set the level
of copy protection of each disc you record.
COPY OFF
A CD recorded with COPY OFF allows unlimited
digital copying. A consumer digital recording
device can digitally record the CD.
COPY ON
A CD recorded with COPY ON allows a single
generation digital copy for personal use. A
consumer digital recording device will be able to
digitally record the CD but the copy will have
Copy Protection set to HCO so further digital
copies cannot be made.
COPY HCO (Home Copy protected Original)
A CD recorded with COPY HCO does not allow
digital copying. A consumer digital recording
device cannot digitally copy the CD.
How to turn COPY ON, OFF or to HCO
1. With the CDR drive selected push and re-
lease the MENU/STORE button.
2. Turn the REC LEVEL/SELECT control until
COPY is displayed.
3. Push and release the REC LEVEL/SELECT
control. ON, OFF or HCO is displayed.
L
R
ANALOG
CD - R
CD
86543217
L
R
ANALOG
CD - R
CD
86543217
4. Turn the REC LEVEL/SELECT control to tab
between ON, OFF and HCO.
5. When correct push and release the REC
LEVEL/SELECT control. COPY is displayed
again.
6. Turn the MENU/STORE button to switch to
other menu choices or press and release the
CANCL/DELETE button to exit menu mode.