Filter
Top Products
RD-VH7/X-VH7 (EN)
53
Timer operation
÷ The timer does not operate when no program is set.
Set the program.
Now the program timer reservation is complete.
Use the same procedure as above when you want
to reserve a program timer operation in PROG.2.
÷ The reservation contents cannot be cleared. The
contents are cleared only when they are
changed.
÷ If the “standby/timer” indicator blinks in green
while the power is in the off (STANDBY) mode,
the timer program cannot be executed.
6
Adjust the clock before setting the timer.
1Press the “TIMER” key on the remote con-
trol unit to select “PROG.1”.
2Press the “POWER” key to switch the power
OFF (standby).
(The “standby/timer” indicator lights in
green.)
Lights
1 Timer execution
TIMER
POWER
TIMER OPERATIONS
Ensure that the power is OFF.
1 Select the preset station No.
2 Press the “enter” key.
TAPE
MD
Select the preset sta-
tion No.
3Select the broadcast station (only
when TUNER is selected).
Press the “enter” key.
Press the “enter” key.
4Select the recording unit.
÷ With timer recording of radio broadcast-
ing, the audio is muted automatically at
the moment the power is switched ON
by the timer.
\
\
enter
\
\
enter
EEEEETUNER
SOURCE
E106.00MHz
FM08CE
\
\
enter
1 Select the source to be played.
2 Press the “enter” key.
TUNER
CD
MD
TAPE
AUX
\
\
enter
EE87.50MHz
COMPLETE!
multi control
multi control
multi control
multi control
2Select the input source.
3Select the broadcast station (only when TUNER is se-
lected).
Notes
Notes