Filter
Top Products
RD-VH7/X-VH7 (EN)
35
Receiving broadcast station
Manual tuning and preset operation
÷ Repeat steps 123 to preset other stations.
÷ If several stations are preset under the same
number, the previous memory is replaced with the
latest memory contents.
For U.K. and Europe
÷ For memorizing of stations other than RDS stations
(FM, AM), memorize the stations according to
chapter “One-by-one presetting (manual pre-
set)”.
One-by-one presetting (manual preset)
1Press the “MEMORY” key on the remote con-
trol unit during reception of a desired station.
2Select the desired preset number between 1
and 40 using the numeric keys on the remote
control unit.
3Press the “MEMORY” key.
8106.60MHz
FM--ST ?
1Press the “band” key.
2Press the “mode” key.
3Rotate the “multi control” knob to select
“AUTO MEMORY ?”(“AUTO PRESET ?”),
then press the “enter” key.
Blinks.
Collective presetting of stations (auto preset)
AUTOST ?
88MEMORYH?
For U.K. and Europe
÷ For use of the RDS function, stations must be
memorized by RDS auto presetting.
÷ RDS stations are given priority during auto preset-
ting. If there is memory left after presetting, the
receiver continues presetting regular FM stations.
1Press the “band” key to select “FM” or “AM”.
2Press the “auto/mono” key to select auto tun-
ing or manual tuning.
3Press the “tuning” key to receive a station.
Auto tuning mode : Each press receives a new
station.
Manual tuning mode: Press repeatedly until the
desired station is received.
demo
auto
/mono
band
tuning