Filter
Top Products
RD-VH7/X-VH7 (EN)
Recording onto cassette tape
44
1.Load a tape in deck.
3.Select the source to be recorded.
Recording onto cassette tape
Note that this cassette deck cannot record onto Metal tapes.
2.Select the tape transport direction.
1Press the “3 fwd” or “2 rev”
key for the direction to be
played .
2Press the “7 stop” key.
O.T.E.
Temporary stop during recording
To end recording
11
22
55
÷ When the CD or MD input is selected while a
disc has already been loaded in the source com-
ponent, it starts to play; press the “7 stop” key
to stop it immediately.
The selected record-
ing source is dis-
played.
TUNER (Radio broadcasting) ›
CD §
MD
TAPE (Recording is impossible.)
AUX
#
input
33
reverse
forward
direction
33
44
0:00
01
MUTE
N.B.I
PROG.1 2
A.P.S.
TA NEWS
PURE A
TRACK
Lights
Note
Note
fwd
rev
22
Select an input source other
than “TAPE” input.
Insert the cassette straight into the insertion slot. Just push lightly
and the cassette will be pulled automatically inside.
÷ Normal (TYPE I) or high (TYPE II) tape selection is set automatically.
÷ It is not recommended to use a 100-minute or longer cassette tapes, for
these tapes are very thin and may easily cause troubles such as entangle-
ment and cutting.
÷ Remove tape slack before loading. Y
÷ Avoid using tapes of which the label is not firmly adhered. Y
Cassette deck
CASSETTE DECK OPERATIONS
Tape exposed side
÷ Wind the tape to the position where recording is to be started.