Kenwood HM-353V Stereo System User Manual


 
48
Timer operation
Application section
Setting an everyday timer program
(PROG. TIMER)
In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can be set
and selected to be activated or not as required. The PROG. timer is not possible with VIDEO CD and MP3 files.
÷ Two timer settings can be reserved independently in two programs PROG.1 and PROG.2.
÷ Please make reservations with an interval of at least one minute, so that the operation times of PROG. 1 and PROG. 2
do not overlap.
Make preparations for the play (recording).
Select the timer number.
Continued on next page
Turning the knob switches the display contents.
1 "O. T. T. SET ?"
2 "PROG. 1 SET ?"
3 "PROG. 2 SET ?"
÷ The previously set contents are displayed. (If you do not
want to change them, simply press the set/demo key.)
÷ When a timer setting has already been made in the se-
lected timer, the setting will be overwritten by the new
setting.
1 Select "TIMER SET ?".
2 Select "PROG. 1 SET ?" or
"PROG. 2 SET ?".
3 Set it.
(Press during display of the program contents.)
(Press the set/demo key while the "?" mark is
blinking.)
Adjust the clock before setting the timer
r
Connect the related equipment under reference to "System connection"
6
~
8
1
2
Playing the auxiliary input source
To listen to radio
To listen to CD
The station should be preset
prior.
¢
Insert a disc. (CD-DA only)
Program playback is not possible.
Set a tape into.
To listen to tape
Make timer setting of the compo-
nent connected to the AUX input
jacks.
For recording
Make preparations for record-
ing. §
Turning the knob switches the display contents.
"TAPE RVS. ?"
"AUTO PRESET "
(Only when the TUNER input is selected)
"AUX INPUT ?"
(Only when the AUX input is selected)
"A.P.S. SET ?"
"TIMER SET ?"
volume / multi control
\
\
\
\
menu
set
/
demo
volume / multi control
set
/
demo
PROG.1 SET?
A non-finalized CD-R cannot be played back.