Kenwood HM-353V Stereo System User Manual


 
33
Application section
Convenient recording methods
Records all tracks in a CD with a simple operation. (All-track recording)
Records a single CD track being played from the beginning. (Single-track recording)
Make preparation for recording.
Be sure to put the cassette deck in stop mode.
1 Perform steps 1 to 3 of the procedure in "Recording on TAPE". §
2 Ensure that the "PGM" and "RANDOM" indicators are not lit.
3 Insert disc in the CD player.
1
÷ If the "PGM" indicator is lit, turn it off by pressing the PGM key in stop mode to cancel the program mode.
÷ If the "RANDOM" indicator is lit, turn it off by pressing the RANDOM key to cancel the random play mode.
Check the current play mode of the CD player.
2
Select the desired CD track and play it.If it is in play mode, stop it.
All-track recording Single-track recording
÷ When step 3 is performed in the middle of CD play-
back, the current track will be recorded from the begin-
ning.
Start recording.
3
÷ When either playback or recording stops, the other op-
eration is stopped automatically.
(To record other tracks, repeat steps 2 and 3 for each
track)
To interrupt a recording
(Recording and playback will be stopped)
At the end of the recording
Cassette deck : Stop is executed after an unre-
corded portion of about 4 sec.
has been produced.
If you are operating the remote, the same effect
as step 3 can be obtained by simply pressing the
O.T.E. key to start recording.
One-touch edit recording
The tape deck of the unit can record signals only on Normal (Type ) and High (Type ) tapes. It cannot record on
Metal (Type
) tapes.
7
stop
Tuning
Mode
TAPE O.T.E.
7
stop
Tuning
Mode
=TAPE)
(
CD-DA
VIDEO CD (with PBC OFF *)