Kenwood HM-353V Stereo System User Manual


 
18
Basic use method
Basic section
1. Load a disc.
The label side must be on top.
Playback of CD-DA (CD, CD-R), MP3 file and the audio of VIDEO CD
1 Press the 0 CD key.
2 Place a disc.
3 Press the 0 CD key.
2. Start playback.
÷ After a few seconds, play starts from
track No.1.
Track No. being played
Elapsed time of track being played
This section describes you how to play CD-DA and the audio of VIDEO CD from the first track and MP3 file
of the order in which it was written.
For details on VIDEO CD menu playback, see "Playback of VIDEO CD". ~w
For details on selecting MP3 file playback, see "Playback of MP3 file". ~
When a disc is placed into the CD player in advance, the unit will be switched on automatically by pressing
the CD 6 key, and playback will start.
Skipping
tracks
Playback from
desired track
Skipping tracks
To stop playback
To stop playback
Start playback/ To pause playback
To fast forward
and backward
÷ Do not touch the played side of disc.
÷ Be sure to place a disc horizontally. Placing it with an inclination will result
in malfunction.
÷ This unit may not be able to play back certain CD-R discs depending on the
recording equipment or discs. See "Notes on playback of CD-R". )
A non-finalized CD-R and MP3
files cannot be played back.
For a VIDEO CD with PBC, check that the "PBC" indicator is not
lit. If the "PBC" indicator is lit, select "PBC OFF" as follows:
1Keep the 7 STOP key depressed for more than 2 seconds.
2Press the AUTO PBC key so that the "PBC" indicator goes off.
3Press the CD 6 key to start playback.
For a disc other than VIDEO CDs with PBC, "PBC OFF" is automatically selected.
AUTO PBC
(Auto playback
Control)
Time display
11
22
0
CD
11
6
CD
22
CD
When playing a MP3 file, press
the CD 6 key repeatedly until
"3" (play indicator) is displayed.
Play display