Kenwood HM-353V Stereo System User Manual


 
13
Preparation section
After plugging the power cord of this unit, press the
POWER (
) key of the remote control unit to turn
the system ON. When the system is turned ON,
press the key of the function to be operated.
Operation
÷ When pressing more than one remote control keys
successively, press the keys securely by leaving an in-
terval of 1 second or more between keys.
÷ The provided batteries are intended for use in operation checking, and their service life may be short.
÷ When the remote controllable distance becomes short, replace both of the batteries with new ones.
÷ If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
Operating range (approx.)
Remote sensor
Loading batteries
1 Remove the cover. 2
Insert batteries.
3 Close the cover.
÷ Insert two R6 ("AA"-size) batteries following the polarity indications.
6 m
Controls and indicators
SOUND key &
Used for switching the EX.BASS play and LOUDNESS
play.
TONE key &
This is used to adjust the tone.
TIME key )
Press to switch the time information displayed during
CD-DA and VIDEO CD (with PBC OFF) playback.
REPEAT key º
This is used for repeated playback.
RANDOM key
Playback of the CD-DA and VIDEO CD (with PBC OFF)
tracks in random order.
7AUTO/PAL/NTSC key %
Press to switch the video output signal format.
ON SCREEN key $
Used to select the information to be displayed on the TV
screen.
8AUTO/MONO key
During tuner reception, press to switch the tuning mode
of the tuner.
PGM key
When CD input is selected :
This is used to program the track sequence.
SET key
In program playback of CD-DA and VIDEO CD (with PBC
OFF), press to enter the selected track number in
memory.
Press to set or enter an item selected with the volume/
multi control knob.
CLEAR key ª
The programmed track sequence is cleared.
9Numeric key (∞‚q
These are used to select CD-DA, VIDEO CD tracks and
MP3 file and as preset
0Keys connected with the VIDEO CD
RESUME key
Used for to resume VIDEO CD and CD-DA playback
from the location where playback was last stopped.
TIME SEARCH key
Used to jump to a specific location on a VIDEO CD and
CD-DA.
DIGEST key q
Used for the Digest functions to scan a disc of a VIDEO
CD and CD-DA.
AUTO PBC key *‡
Press to activate/deactivate the playback control (PBC)
functions of a VIDEO CD.
SLOW key ·
Used for slow-motion playback of a VIDEO CD.
STEP key ·
Used to advance the picture of a VIDEO CD frame by
frame.
FREEZE key ·
Used to freeze the image of a VIDEO CD.
MULTI PLEX key ·
Used to change the audio output channel of a VIDEO CD
and MP3 files.
FM/AM
6
30˚
30˚
STOP
AUTO
PAL
NTSC
CD
SELECT
TUNER
BAND
RC-M0304V
N
E
X
T
P
R
E
V
.
MULTI PLEX
AUTO PBC
CLEAR
SET
AUTO/MONO
PGM
ON SCREEN
TIME
ENTER
POWER
FREEZE
DIGEST
9
6
3
TONE
STEP
0
8
5
2
RANDOM
SOUND
TUNING
REC RETURN
SLOW
RESUME
10
7
4
1
REPEAT
SLEEP
MUTE
O.T.E.
TIMER
TAPE
VOLUME
AUX
TIME
SEARCH
P. CALL P. CALL
TAPE EQ.
Notes
Notes