Kenwood HM-353V Stereo System User Manual


 
17
Basic section
Basic use method
Muting the sound temporarily
÷ Press again to resume the original volume.
÷ This is also cancelled when the volume is changed.
Bass and treble compensation
Each press switches the modes as follows.
1 "EX.BASS" lights.
The lowest and highest frequencies are
enhanced regardless of the current volume
level.
2 "LOUD" (Loudness) lights.
The lowest and highest frequencies are
enhanced according to the current volume
level. (Effective during low-volume listen-
ing.)
3 Both indicators off.
Cancelled.
÷ Headphones with a stereo mini plug can be con-
nected.
÷ The sounds from all speakers are cut off.
Listening through headphones
Insert the headphone plug into the headphone jack.
The lowest and highest frequency bands can be
adjusted independently.
Tone adjustment
÷ The levels of both "BASS" and "TREBLE" can be ad-
justed in 2 steps in the range between -8 and +8.
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit turns it off and cancels the sound en-
hancement mode.
(To adjust the other frequency band, repeat steps
1 and 2 for it.)
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit turns it off and cancels the sound en-
hancement mode.
1 Select the frequency band.
2 Adjust.
Each press switches the operation.
1 "BASS" (low frequency) adjust-
ment
2 "TREBLE" (high frequency) adjust-
ment
3 Normal mode
(Go to step 2 within 20 seconds.)
Remote control unit only
Remote control unit only
SOUND
TONE
VOLUME
BASS + 0
TREBLE + 0
MUTE