Kenwood HM-353V Stereo System User Manual


 
26
Recording on TAPE
Basic section
1. Load a tape in deck.
2. Select the tape transport direction.
1 Press the TAPE 2 3 key corresponding to the desired direc-
tion.
2 Press the 7 STOP key to stop playback.
To reverse the transport direction :
÷ When recording is started, the tape is transported in the direction selected
in this step.
Check the tape transport direction indicator.
¡
÷ Search the position you want to start recording in advance.
1 Press the area marked 0 push open to open the cassette
holder.
2 Insert a tape.
3 Press the area marked 0 push open to close the cassette
holder.
Start recording/ Pause the recording
Stop the recording
Stop the recording
Recording on TAPE
÷ Remove tape slack before loading.
Do not use a cassette with more than 90-minute recording time, for the
tape used in such a cassette is very thin and tends to cause problem such
as entanglement around the pinch roller or could be easily cut off.
The tape deck of the unit can record signals only on Normal (Type ) and High (Type ) tapes. It cannot record on
Metal (Type
) tapes.
11
22
33
44
55
0
push open
11
TAPE
2 3
22