Filter
Top Products
29
English
DAP modes can be used when the front and surround
speakers are connected to this unit (without respect to
the center speaker connection: no sound comes out of
the center speaker even if it is connected).
The following DAP modes are provided for this unit:
LIVE CLUB Gives the feeling of a live music club with a
low ceiling.
DANCE CLUB Gives a throbbing bass beat.
HALL Gives clear vocal and the feeling of a
concert hall.
PAVILION Gives the spacious feeling of a pavilion with
a high ceiling.
These DAP modes can be used to add the acoustic surround
effects while reproducing 2-channel stereo software, either
analog or Linear PCM digital signal, and can give you a real
“being there” feeling.
• When one of the DAP modes is selected, the DSP indicator
lights up on the display.
Creating sound field
Reflections from behind
Early reflections
Direct sounds
■ All Channel Stereo
This mode can reproduce a larger stereo sound field using all
the connected (and activated) speakers.
• You cannot select All Channel Stereo when playing
back DVD AUDIO.
All Channel Stereo can be used when the front and
surround speakers are connected to this receiver without
respect to the center speaker connection.
If the center speaker is connected and activated, the same
phases of the front left and right signals are mixed and output
through the center speaker.
All Channel Stereo can be used while reproducing 2-channel
stereo software, either analog or Linear PCM digital signal.
• When All Channel Stereo is selected, the DSP indicator
lights up on the display.
All Channel Stereo reproduction
⅜: Possible ן: Impossible
Available Surround modes for each input signal
Modes
STEREO
DOLBY DTS PL II PL II LIVE DANCE
HALL PAVILION
ALL CH
Signals DIGITAL SURROUND MOVIE MUSIC CLUB CLUB ST.
Dolby Digital
⅜⅜ןןןןןןןן
(Multi-channel)
Dolby Digital
⅜ןן⅜⅜ןןןןן
(2-channel)
Dolby Surround
⅜ןן⅜⅜ןןןןן
(matrix 2-ch)
DTS Digital
Surround ⅜ן⅜ןןןןןןן
(Multi-channel)
DTS Digital
Surround ⅜ןן⅜⅜ןןןןן
(2-channel)
Linear PCM ⅜ןן⅜⅜⅜⅜⅜⅜⅜
Analog ⅜ןן⅜⅜⅜⅜⅜⅜⅜
Sound reproduced from
normal stereo
Sound reproduced from
All Channel Stereo
Creating Realistic Sound Fields
Notes for DVD AUDIO multi-channel surround
• When playing back DVD AUDIO, you cannot select Pro Logic II,
DAP modes, and All Channel Stereo.
• For the multi-channel track which can be mixed down:
When “NO” is selected as the speaker setting for the center or
surround speakers, the corresponding multi-channel is mixed
down to the front speaker channels.
• For the multi-channel track which cannot be mixed down:
– When you try to deactivate Surround mode during play,
“MULTI CH” appears on the display and Surround mode still
remains.
– When you start playback with Surround mode deactivated, “LR
ONLY” appears on the display. In this case, you cannot listen
to the sounds other than left and right front channels.
28-31_RX-DV31SL[C]f.p65 03.12.18, 15:0829