Filter
Top Products
25
English
Basic Settings
MPEG-2AAC
TA NEWS INFO
ANALOG
S
DIGITAL AUTO DSP SLEEP REPEAT RANDOM RDS INPUT ATT
SPK 1 2
AUTO MODE
A.POSITION
PROGRESSIVE1A-B
DIGITAL
LPCM
LFE
PPCM AUTO
SURROUND
GROUP TITLE TRACK CHAP.
RESUME
kHz
MHz
VOL
BONUSB.S.P TUNED STEREO AUTO MUTING
PL
SUBWFR
L C R
LS RS
PROGRAM
REC
7 Digital input (DIGITAL IN) terminals
“DGT”
When you use the digital input terminals, register what
components are connected to which terminals (DIGITAL IN 1/
DIGITAL IN 2), so that the correct source name will appear
when you select the digital source.
Set the appropriate digital terminal settings.
• Each time you press CONTROL 3 or 2, the settings
change as follows:
1 DBS 2 TV “ 1 DBS 2 CDR “ 1 TV 2 DBS “
1 TV 2 CDR “ 1 CDR 2 DBS “ 1 CDR 2 TV “
(back to the beginning)
Notes:
•“1DBS 2TV” is the initial setting.
• If you want to connect a CD recorder to the digital input terminal,
change the source name from “TAPE” to “CDR.”
For details, see “Changing the Source Name” on page 13.
7 Auto surround
“AUTO SR”
Surround mode is automatically activated when a digital
multi-channel source such as Dolby Digital or DTS software
or 2-channel matrix source such as Dolby Surround is played
back.
You can enjoy Surround mode simply by selecting the source
(with digital input selected for that source)—Auto Surround.
Select one of the following settings:
ON The AUTO SURROUND indicator always lights up
on the display (initial setting).
• If multi-channel signals come in, an appropriate
Surround mode will be turned on.
• If Dolby Digital 2-channel or DTS 2-channel
including surround signals come in, “PLII
MOVIE” will be selected.
• If Dolby Digital 2-channel or DTS 2-channel
signals without surround signals come in,
“STEREO” will be selected.
• If the other signals come in, nothing will change.
OFF Select to deactivate Auto Surround.
MPEG-2AAC
TA NEWS INFO
ANALOG
S
DIGITAL AUTO DSP SLEEP REPEAT RANDOM RDS INPUT ATT
SPK 1 2
AUTO MODE
A.POSITION
PROGRESSIVE1A-B
DIGITAL
LPCM
LFE
PPCM AUTO
SURROUND
GROUP TITLE TRACK CHAP.
RESUME
kHz
MHz
VOL
BONUSB.S.P TUNED STEREO AUTO MUTING
PL
SUBWFR
L C R
LS RS
PROGRAM
REC
MPEG-2AAC
TA NEWS INFO
ANALOG
S
DIGITAL AUTO DSP SLEEP REPEAT RANDOM RDS INPUT ATT
SPK 1 2
AUTO MODE
A.POSITION
PROGRESSIVE1A-B
DIGITAL
LPCM
LFE
PPCM AUTO
SURROUND
GROUP TITLE TRACK CHAP.
RESUME
kHz
MHz
VOL
BONUSB.S.P TUNED STEREO AUTO MUTING
PL
SUBWFR
L C R
LS RS
PROGRAM
REC
Notes:
• This function does not take effect in the following cases:
– While playing an analog source.
– While selecting “DGTL D.D.” or “DGTL DTS” as the fixed digital
input mode (see page 15).
• If you press SURROUND ON/OFF with Auto Surround activated,
Auto Surround will be canceled temporarily for the currently
selected source.
Auto Surround setting will be restored in the following cases:
– When you turn off and on the unit,
– When you change the source,
– When you change the analog/digital input, and
– When you reset “AUTO SR” to “ON” again.
7 Video output mode
“VOUT”
After connecting your TV to the unit, register the type of the
connected video output terminal.
Without setting this, AV COMPU LINK does not work
appropriately when “DVD” is selected as the source (see
“AV COMPU LINK Remote Control System” on pages 61 and
62).
Set the output terminal appropriately:
VIDEO Select when you connect your TV to the VIDEO
jack by using a composite video cord (initial
setting).
S Select when you connect your TV to the
S-VIDEO jack by using an S-video cord.
COMPNT Select when you connect your TV to the DVD
COMPONENT VIDEO OUT jacks by using a
component video cord.
21-27_RX-DV31SL[C]f.p65 03.12.18, 15:0725