Filter
Top Products
– 70 –
Specifications
Amplifier
Output Power (IEC 268-3/DIN):
19 W per channel, min. RMS, both channels driven into
6 Ω at 1 kHz, with no more than 0.9% total harmonic
distortion
Audio input sensitivity/Impedance (at 1 kHz)
Analog input:
LINE 1: 190 mV/47 kΩ (at “INPUT Level 1”)
500 mV/47 kΩ (at “INPUT Level 2”)
LINE 2: 45 mV/47 kΩ (at “INPUT Level 1”)
55 mV/47 kΩ (at “INPUT Level 2”)
110 mV/47 kΩ (at “INPUT Level 3”)
290 mV/47 kΩ (at “INPUT Level 4”)
Digital input:
DIGITAL IN: Optical
Signal wave length: 660 nm
Input level: –23 dBm to –15 dBm
(With the built-in sampling rate
converter, corresponding to 32 kHz/
44.1 kHz/48 kHz)
Audio output level/Impedance (at 1 kHz)
LINE 1: 150 mV/3.9 kΩ
Speakers/Impedance: 6 Ω – 16 Ω
Tuner
FM tuning range: 87.50 MHz — 108.00 MHz
AM tuning range:
531 kHz — 1 602 kHz
(at 9 kHz channel spacing)
530 kHz — 1 710 kHz
(at 10 kHz channel spacing)
CD player
CD Capacity: 3 CDs
Dynamic range: 92 dB
Signal-to-noise ratio: 100 dB
Wow and flutter: Immeasurable
MD recorder
Audio playing system: MiniDisc digital audio system
Recording system: Magneto-optical overwrite system
Reading system: Non-contact, semiconductor laser
pickup (λ=780 nm)
Error correction system:
CIRC (Cross Interleave Reed-
Solomon Code)
Sampling frequency: 44.1 kHz
(With sampling rate converter for
recording — 32 kHz/44.1 kHz/
48 kHz)
Audio compression system:
ATRAC (Adaptive TRansform Acoustic
Coding)/ATRAC3 ( )
General
Power requirement:
AC 110V/AC 127V/AC 220V/
AC 230V – AC 240V
(adjustable with the voltage
selector), 50 Hz/60 Hz
Power consumption: 75 W (at operation)
11 W (on standby)
Dimensions (approx.):
215 mm x 170 mm x 349 mm (W/H/D)
(8
1
/2 in. x 6
3
/4 in. x 13
3
/4 in.)
Mass (approx.): 6.2 kg (13.7 lbs)
Supplied accessories
See page 6.
Design and specifications are subject to change without
notice.
US and foreign patents licensed from Dolby Laboratories
Licensing Corporation.
EN65-70.CA-MXS6MD[UJ]/f 00.11.6, 6:52 PM70