Filter
Top Products
– 60 –
Sound Setting
Selecting the sound modes
You can select one of the 6 preset sound modes (3 surround
modes and 3 SEA – Sound Effect Amplifier – modes) and 1
manual mode.
1
Press MENU.
The menu screen appears in the main display.
2
Push the joy control downward ( ) to select
“SOUND” (highlighted).
3
Push the joy control rightward ( ) or leftward ( )
to select a sound mode you want.
• The sound modes change as follows:
• See pages 15 and 16 for details.
4
Press SET to finish the setting.
Reinforcing the Bass Sound
The richness and fullness of the bass sound is maintained
regardless of how low you set the volume — Active Bass
Extension.
1
Press MENU.
The menu screen appears in the main display.
2
Push the joy control downward ( ) to select
“A. BASS” (highlighted).
3
Push the joy control rightward ( ) or leftward ( )
to turn “ON” or “OFF” the Active Bass Extension.
• See page 12 for details.
4
Press SET to finish the setting.
Continued
D.CLUB
SET UP
FLAT
(Canceled)
HALL
STADIUM
ROCK
POP
MANUAL
CLASSIC
• CD and MD Playback Mode Setting
CD playback mode setting — CD
Appears only when the unit is turned on, and the
source is CD, but not playing.
CD repeat mode setting — CD REPEAT
Appears only when the unit is turned on, and the
source is CD.
MD playback mode setting — MD
Appears only when the unit is turned on, and the
source is MD, but not playing.
MD repeat mode setting — MD REPEAT
Appears only when the unit is turned on, and the
source is MD.
• Display Setting
Animation Selection — ANIMATION
Display Color Selection — COLOR
Display Pattern Selection — DISP
Contrast Adjustment — CONTRAST ADJ.
Appears only when the unit is turned on.
Startup Display Setting
— Startup Disp. (see page 50)
Appears only when the unit is turned off.
• External Source Setting
Input Level Adjustment — INPUT Level
Appears only when the unit is turned on, and the
external equipment connected to the LINE 1
jacks or to the LINE 2 jack is selected as the
source.
Source Name Change — NAME CHANGE
Appears only when the unit is turned on, and the
external equipment is selected as the source.
• Auto-Power Off Setting — A. P. off
Appears only when the unit is turned on.
EN58-64.CA-MXS6MD[UJ]/f 00.11.6, 0:50 PM60