– 8 –
SPEAKER
IMPEDENCE 6
16Ω
CAUTION:
SPEAKERS
RIGHT LEFT
VOLTAGE SELECTOR
230 -
240V
220V
127V
110V
Connecting Other Equipment
You can connect the following equipment to this unit:
• Cassette deck — used as a playback and recording
device. By using the cassette deck, you can record any
source played back on this unit.
• Portable MD player — used as a playback device.
• Audio equipment with an optical digital output terminal
— used only as a digital playback device.
When you connect and use these equipment, refer also to
the manuals supplied with them.
• DO NOT connect other equipment while the
power is on.
• DO NOT plug in any equipment until all
connections are complete.
Continued
To connect another component such as a cassette
deck
Be sure that the plugs of the audio cords and the jacks on
the rear of the unit are color-coded: White plugs and jacks
are for left audio signals, and red ones for right audio
signals.
To input (REC)
By using audio cords (not supplied), connect:
• Between the audio input jacks on the cassette deck and
the LINE 1 OUT jacks — For recording on the cassette
deck.
• Between the audio output jacks on the cassette deck and
the LINE 1 IN jacks — For playing a tape.
To output (PLAY)
Ex. cassette deck
To output (stereo mini-jack)
To connect a portable MD player with a mini output
jack
By using a cable with the stereo mini-jack, connect
between the stereo mini-jack on the other equipment and
the LINE 2 jack on the front panel.
To connect audio equipment with an optical digital
output terminal
MD player
DISC LOADING MECHANISM
LONG
MODE
REC
MODE
SP/LP2/LP4
REC PAUSE
HIGH SPEED
CD MD
TITLE/EDIT
ENTER
/DEMO
PHONES
LINE 2
MENU
DISC
SPEAKER
IMPEDENCE 6
16Ω
CAUTION:
SPEAKERS
RIGHT LEFT
To optical digital
output
Connect between the optical digital output terminal on the
other equipment and the DIGITAL IN terminal.
Protective cap
Before connecting the other equipment,
remove the protective cap from the terminal.
Audio equipment with an
optical digital output
EN01-09.CA-MXS6MD[UJ]/f 00.11.6, 0:42 PM8