Filter
Top Products
– 16 –
To check the sound mode currently selected, press
SOUND once while the SOUND indicator is lit. The
currently selected sound mode screen will appear in the
main display.
When using the unit, you can select the sound
modes by using the menu (see page 60).
Creating Your Own Sound Mode —
MANUAL Mode
You can create and store your own sound mode.
• You have to use the menu for the following operations.
For general information on the menu, see pages 59 and
60.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step
1
again.
On the unit ONLY:
1
Press MENU.
2
Push the joy control downward ( ) to select
“SOUND” (highlighted).
Ex. When “HALL” is currently selected (with “Elephant”
selected as the animation character)
3
Push the joy control rightward ( ) or leftward ( )
to select “SET UP.”
• Each time you push the joy control, the sound modes
change as follows:
4
Press SET.
The equalizer pattern adjustment screen appears.
5
Adjust the equalizer pattern.
1) Push the joy control rightward (
) or leftward
(
) to select the frequency range to adjust
(LOW, MID, HIGH).
2) Push the joy control upward ( ) or downward
(
) to adjust the level (–3 to +3) of the selected
frequency range.
3) Repeat steps 1) and 2) to adjust the level of the
other frequency ranges.
6
Press SET again (or wait until the above indication
disappears).
The equalizer pattern you have created is stored in
memory (MANUAL).
To use your own sound mode
Select “MANUAL” when using the sound modes. See
“Selecting the Sound Modes” on page 15.
Ex. When the source is CD, and playing
Current sound mode
D.CLUB
SET UP
FLAT
(Canceled)
HALL
STADIUM
ROCK
POP
MANUAL
CLASSIC
EN10-16.CA-MXS6MD[UJ]/f 00.11.6, 0:43 PM16