Filter
Top Products
– 24 –
If you try to program a 33rd step
“CD PROGRAM FULL” will appear in the main display.
If your entry is ignored
You have tried to program a track from an empty tray, or a track
number that does not exist on the CD (for example, selecting track
14 on a CD that only has 12 tracks). Such entries are ignored.
Playing at Random — Random Play
The tracks of all loaded CDs will play at random.
On the remote control:
1
Load CDs.
• If the current selected source is not the CD player,
press CD 3 / 8, then 7 before going to the next step.
2
Press PLAY MODE so that “CD RANDOM”
appears in the main display.
The RANDOM indicator also lights.
• Each time you press the button, play mode changes
as follows:
3
Press CD 3 / 8.
The tracks are played at random.
Random play stops when all the tracks are played once.
On the unit:
You have to use the menu for the following operations. For
general information on the menu, see pages 59 and 60.
1
Load CDs.
• If the current selected source is not the CD player,
press CD # / 8, then 7 before going to the next step.
2
Select Random play mode using the menu.
(See also page 61.)
1) Press MENU.
“MENU” appears in the main display.
2) Push the joy control downward (
) to select
“CD (current play mode setting*).”
* The current play mode — CONTINUE,
RANDOM, or PROGRAM will appear
following “CD” in the main display.
3) Push the joy control rightward (
) or leftward
(
) to select “RANDOM.”
4) Press SET.
“CD RANDOM” appears in the main display. The
RANDOM indicator also lights.
3
Press CD # / 8.
The tracks are played at random.
Random play stops when all the tracks are played once.
To skip the playing track, press ¢ (¡) on the remote
control or push the joy control rightward (¢
).
• You cannot go back to the previous tracks by pressing
4 (1) on the remote control or pushing the joy
control leftward (4
).
To stop during play, press 7.
• Random play also stops when you open a disc tray.
To exit from Random play mode, select another playback
mode (Continuous play or Program play mode) before or
after play either by pressing PLAY MODE on the remote
control or by using the menu on the unit (see page 61).
• Pressing one of the disc number buttons (CD1, CD2, and
CD3) starts Continuous play from the first track of the
selected CD.
• Pressing one of the number buttons will start Continuous
play from the selected track of the currently selected CD.
• Turning off the unit will automatically change the
playback mode to Continuous play.
Program play
(CD PROGRAM)
Random play
(CD RANDOM)
Continuous play
(CD CONT.)
Continued
EN20-25.CA-MXS6MD[UJ]/f 00.11.6, 0:45 PM24