Filter
Top Products
– 35 –
All CDs Synchronized Recording
7Using the HIGH-SPEED CD 3 MD button on the unit
This is the easiest way of CD recording.
1
Insert a recordable MD into the MD loading slot.
2
Prepare CDs.
• After placing CDs, press CD # / 8, then 7 before
going to the next step.
• You can make a program (see page 22) or select
Random play mode (see page 24) if you want. In this
case, you cannot select the starting disc
= go to step
4
.
3
Press DISC to select the disc you want to start
recording with.
• Make sure that the correct disc number indicator is
selected on the display.
4
Press LONG MODE on the unit if necessary.
The recording length mode changes as follows:
• For the recording length mode, see “Stereo Long-
Hour Recording (MDLP)” on page 33.
5
Press HIGH-SPEED CD 3 MD.
The REC PAUSE lamp on the unit lights, and recording
starts.
When all loaded CDs are recorded, recording will stop.
Both the CD player and the MD recorder stop
automatically.
To stop recording, press 7. “WRITING” flashes for a
while.
Both the CD player and the MD recorder stop.
SP
(Standard Play)
LP4
(4 Times Long Play)
LP2
(2 Times Long Play)
6
When recording a CD:
Press CD # / 8.
When recording from external equipment:
Start playback.
• For details, see the manual supplied with your
equipment.
To stop recording for a moment, press REC PAUSE (or
MD REC PAUSE) again.
To resume recording, press MD # / 8 again. (A track mark
is recorded when you resume recording.)
To stop recording, press 7. “WRITING” flashes for a
while.
• When recording from a CD, both the CD player and the
MD recorder stop.
When recording from a CD using Standard
Recording
Two track marks may be recorded at the beginning of the
recording. If this occurs, join these two track marks using the JOIN
function described on page 42.
You can use more useful and easier recording
methods
• For recording from CDs, see “Recording CDs — CD
Synchronized Recording” below.
• For recording from the external equipment, see “Recording the
External Equipment — Sound Synchronized Recording” on
page 38.
Recording CDs — CD Synchronized
Recording
You have three methods to record from CDs onto an MD.
Using the synchronized recording methods, you can start
and stop CD play and MD recording at the same time.
• All CDs Synchronized Recording — Records all
loaded CDs continuously (Continuous play mode) or at
random (Random play mode), or the program you have
made (Program play mode).
• One CD Synchronized Recording — Records the
entire CD.
• First Track Recording — Records the first track of
each CD.
For each recording method, you can select the recording
speed — either high speed or normal speed.
Remaining playback time
Recording time remaining
on the MD
EN31-38.CA-MXS6MD[UJ]/f 00.11.6, 0:46 PM35