Filter
Top Products
– 27 –
Playing Back the Entire MD — Normal Play
You can play an MD.
Before inserting an MD, turn on the unit; otherwise,
you cannot insert it.
1
Insert an MD into the MD loading slot.
The MD is pulled in automatically.
The MD insertion indicator ( ) lights on the display.
2
Press MD 3 / 8.
The MD source (
) indicator lights on the display
and MD playback starts from the first track.
The recording length mode indicator (SP/LP2/LP4)*
lights on the display.
To stop during play, press 7.
To remove the disc, press 0 for the MD recorder.
Insert an MD in the same way
as indicated on the MD.
Total Track No.
Total Playing time
Track No. Elapsed playing time
If the MD or track has a title
The title will be shown at the center portion of the main display. (If
a title is long and cannot be shown at a time, the unit scrolls the
title to show the entire title.)
* About recording length mode
MDs are played back in the same recording length mode as they
were recorded. When an MD starts playing, the playback mode of
the currently playing track lights on the display.
SP : Indicates the tracks recorded in standard stereo recording
mode on this unit or those recorded on an MD recorder
incompatible with MDLP*.
LP2 : Indicates the tracks recorded in 2 times long-hour stereo
recording mode.
LP4 : Indicates the tracks recorded in 4 times long-hour stereo
recording mode.
* MDLP features a new sound compression method
(ATRAC3) and a 2 times (or 4 times) long-hour stereo
recording and playing function.
The MDLP logo is marked on the MD recorders and players
compatible with MDLP. It is also marked on MDs pre-
recorded in ATRAC3 (excluding recordable MDs).
Basic MD Operations
While playing an MD, you can do the following operations.
To stop playback for a moment
Press MD 3 / 8.
To resume play, press MD 3 / 8 again.
To locate a particular point in a track during play
On the remote control:
Press and hold ¡ (¢) or 1 (4).
• ¡ (¢) : Fast-forwards the tracks.
• 1 (4) : Fast-reverses the tracks.
On the unit:
Push the joy control upward (¡
) or downward
(1
).
• Upward (¡
) : Fast-forwards the tracks.
• Downward (1
) : Fast-reverses the tracks.
The following indications appear when the current
source is “MD”
EN26-30.CA-MXS6MD[UJ]/f 00.11.6, 0:46 PM27